ToltHawk devices are easy to install in water tanks.

Required Tools

• 1.75″ (45mm) hole cutter
• Six 1/4″ (6mm) drilling/thread-forming screws and washers
• Screw driver
• 1/8″ (3mm) drill bit

Parts Provided

• ToltHawk unit for water tanks
• Flange base for ToltHawk

Steps

1. Using flange base as a template, drill a 1.75″ (45mm) hole into the top center of the water tank.
2. Place and align the flange over the hole and secure it with six screws
3. Mount the ToltHawk unit on the flange and secure it with the provided 1/4″ bolts
4. Upload of water level automatically starts. You can verify the level on your phone or desktop

PROs

1. Self contained, all-in-one unit
2. Light and easy to install on any water tank
3. Configurations can be remotely done from your phone or computer